收藏本站
Using the AT90USBKey
2.5
2.5.1
In-System Programming
Programming with USB bootloader: DFU (Device Firmware Upgrade)
AT90USB part comes with a default factory pre-programmed USB bootloader located in
the on-chip boot section of the AT90USB. This is the easiest and fastest way to
reprogram the device directly over the USB interface. The “Flip” PC side application, is
available from the Atmel website, offers a flexible an user friendly interface to reprogram
the application over the USB bus.
The HWB pin of the AT90USB allows to force the bootloader section execution after
reset. (Refer to AT90USB datasheet section “boot loader support”). To force bootloader
execution, operate as follow:
Press both “RST” and “HWB” push buttons
First release the “RST” push button
Release the “HWB” push button
For more information about the USB bootloader and “Flip” application, please refer to
the “USB bootloader datasheet document” and “Flip’s user manual”.
Note:
The HWB pin is active only if the HWBE fuse is set (default factory configuration).
2.5.2
Programming with AVR JTAGICEmKII
The AT90USB can be programmed using specific JTAG link. To use the AVR
JTAGICEmkII with an AT90USBKey an optional HE10 connector should be soldered to
J9 footprint. Then the JTAG probe can be connected to the AT90USBKey as shown in
Figure 2-10 .
AT90USBKey Hardware User Guide
Note:
When the JTAGEN Fuse is unprogrammed, the four TAP pins are normal port pins, and
the TAP controller is in reset. When programmed, the input TAP signals are internally
pulled high and the JTAG is enabled for Boundary-scan and programming. The
AT90USB device is shipped with this fuse programmed.
2-13
7627A–AVR–04/06
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
AT9206 USBPLUGINCARD KIT EVAL USB QTOUCH PLUGIN/CARD
AT9946 BATTERY BOX FOR DEM KITS
ATA6662-EK BOARD EVALUATION FOR ATA6662
ATADAPCAN01 EXTENSION CAN ADD-ON TO STK500/1
ATAVRBC100 REF DESIGN KIT BATTERY CHARGER
ATAVRDB101 MODULE DISPLAY LCD/RGB BACKLIGHT
ATAVRMC100 KIT EVALUATION FOR AT90PWM3
ATAVRMC200 KIT EVAL FOR AT90PWM3 ASYNC
相关代理商/技术参数
AT-910 制造商:HRS 制造商全称:HRS 功能描述:Stripline Mounting Fixed Attenuators (DC to 8 GHz)
AT-910(40) 功能描述:衰减器 -IC RoHS:否 制造商:Skyworks Solutions, Inc. 最大衰减:18 dB 容差: 阻抗: 功率额定值:30 dBm 安装风格:SMD/SMT 工作温度范围:- 40 C to + 85 C
AT-913(40) 功能描述:衰减器 -IC RoHS:否 制造商:Skyworks Solutions, Inc. 最大衰减:18 dB 容差: 阻抗: 功率额定值:30 dBm 安装风格:SMD/SMT 工作温度范围:- 40 C to + 85 C
AT9173 制造商:AME 制造商全称:Analog Microelectronics 功能描述:Bus Termination Regulator
AT9173AG 制造商:AME 功能描述:AT9173AG BUS TERMINATION REGULATOR /IGROVVVV
AT9173EG 制造商:AME 功能描述:AT9173EG PSOP-8 Bus Termination Regulator R@2.5K
AT91C140 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:AT91 ARM Thumb Microcontrollers
AT91C140_05 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:AT91 ARM Thumb Microcontrollers